
Specifications
Description
A rigid fishing boat for lakes and rivers
The Argo-Scout 310 is a 3.05 m fishing boat with a one-piece hull rotomolded from high-density polyethylene (HDPE). It is rated for 3 persons and a maximum load of 300 kg. There is nothing to inflate or assemble: put the boat in the water and you are ready to go.
Stable tri-hull and shallow draft
The tri-hull with three keels and a 156 cm beam makes the boat very stable. You can stand to cast and land fish, and move around on board with confidence. With a draft of about 15 cm, you can fish in shallow water: small bays, weedy shores and shallow rivers. Keep in mind that the outboard leg needs more depth than the hull.
Built for fishing
The bow seat can also be used as a casting platform. The bow seat and both stern seats have lockers that close and are protected from water, a convenient place for tackle, clothing and personal items. The two aluminum grab rails along the sides and the bow have accessory tracks for a fish finder, extra rod holders and other equipment. There are four rod holders in the gunwales. There is a place for a removable steering console, and the bow has enough room for an electric motor with GPS anchor mode.
Hull and transom
The polyethylene is UV-resistant. The hull needs no painting, does not rust and takes knocks against stones, slipways and piers. The aluminum transom plate is 381 mm high and takes short-shaft (S) outboards of up to 20 HP, with 9.9-15 HP recommended.
Transport and pickup
The boat weighs 130 kg and is transported on a trailer. You can pick it up at our store in Vilnius.
Standard equipment
Warranty and returns
1. Manufacturer’s warranty
1.1. ARGO DRIVE HDPE boats are covered by a manufacturer’s warranty of 2 (two) years from the date the goods are handed over to the buyer.
1.2. The warranty covers manufacturing and material defects of the hull, including defects of moulding, cracks and leaks not caused by impact, and defects of the fittings: grab rails, handles, cleats, the drain plug, locker lids and latches, accessory tracks and the aluminum transom plate.
1.3. For boats used for rental, guiding or other commercial purposes, the warranty period under 1.1 is 1 (one) year.
1.4. Outboard motors, electric motors, batteries, electronics and other equipment supplied with the Console or Fisher Pro configurations are covered by the warranty terms for that type of product.
2. Exclusions
The warranty does not apply in the following cases.
- Mechanical damage, including impacts, dents, gouges and holes caused by stones, piers or other objects.
- Exceeding the maximum load, number of persons, motor power or motor weight specified for the boat.
- Improper storage or transport, including hull deformation caused by unsuitable supports or overtightened straps on a trailer.
- Fading, scratches and scuffs resulting from normal use.
- Drilling into the hull.
- Repairs, welding or heating of the hull, structural modifications or installation of additional equipment without the prior consent of the seller.
- Use of the boat in competitions.
- Damage resulting from accidents, collisions, grounding, fire or force majeure.
3. How to make a warranty claim
3.1. To make a warranty claim, write to info@argo-drive.com. State your order number, describe the defect and attach photos or a video. Your order number or invoice serves as proof of purchase. No warranty card is required.
3.2. We will review your claim and reply within 14 (fourteen) days.
3.3. If the claim is accepted, we will repair the boat at our service in Vilnius (Talino g. 10A), including welding of the HDPE hull where needed, or replace it with a new one. If repair or replacement is not possible, we will refund the price of the goods.
3.4. We will agree with you in advance how the boat is brought to our service.
4. Statutory rights of the consumer
This warranty is a voluntary commitment of the seller. It does not limit or exclude the rights granted to the consumer by the laws of the country of residence. In particular, if the goods do not conform to the contract, the consumer is entitled to a free repair or replacement from the seller and, where provided by law, to a price reduction or termination of the contract.
5. 14-day returns
5.1. Goods ordered online may be returned within 14 (fourteen) days of receipt without giving any reason.
5.2. Before returning the boat, notify us of your decision at info@argo-drive.com.
5.3. The boat must be returned to our store in Vilnius (Talino g. 10A) clean, dry and complete with all fittings and accessories.
5.4. The boat cannot be returned by post. Return transport to our store is arranged and paid for by the buyer.
5.5. We will refund the price of the goods within 5 (five) business days of receiving the boat, and in any case no later than 14 (fourteen) days from your notice of withdrawal. We may withhold the refund until we have received the boat.
5.6. The buyer may inspect the boat to the extent necessary to establish its nature, characteristics and functioning. If the boat has been used beyond this, for example on the water, the seller may deduct the amount by which its value has diminished.
5.7. Boats with a manufacturing defect are handled under sections 3 and 4.
6. Warrantor
UAB Abekso Grupė
Talino g. 10A, LT-05200 Vilnius, Lithuania
Company code 303295587
VAT number LT100009144414
Tel. +370 661 36531
info@argo-drive.com
Delivery, payment and taxes
Orders are shipped on the next working day. Orders placed on weekends or public holidays are shipped on the first working day after them.
Delivery to Lithuania takes 1-2 working days, to Latvia and Estonia 2-3 working days, to Finland 2-5 working days. The delivery cost to your address is shown in the delivery calculator next to the Add to cart button and at checkout.
In Poland, ARGO boats are sold by our dealer HLO.PL Robert Zięba. Delivery to other countries is available on request. Send a request through the delivery calculator.
You can also pick up your order at our store, Talino g. 10A, Vilnius.
All prices include VAT. There are no customs fees on deliveries within the EU. For deliveries outside the EU, local customs duties, taxes and fees may apply.
Companies registered in another EU country with a valid VAT number can buy without VAT, provided the legal conditions are met. Write to info@argo-drive.com before ordering, we will check your company details and issue an invoice. For private buyers, VAT is always included in the price.
Why choose the Argo-Scout 310
- 01
One-piece HDPE hull
The hull is rotomolded in one piece from UV-resistant high-density polyethylene (HDPE). There is nothing to inflate or assemble: put the boat in the water and go.
- 02
Stable tri-hull
Three keels and a 156 cm beam make the boat very stable. You can stand and cast with confidence, and the boat does not heel even when you stand up or move to the side.
- 03
About 15 cm draft
With such a shallow draft, you can fish in shallow water: small bays, weedy shores and shallow rivers.
- 04
Motors up to 20 HP
The transom takes short-shaft (S) outboards of up to 20 HP, with 9.9-15 HP recommended.

Is the Argo-Scout 310 right for you?
See what the Argo-Scout 310 is best suited for.
- Fishing for one or twoRecommended
- Casting while standingRecommended
- Shallow and weedy waterRecommended
- Kept on a trailer or at a mooringRecommended
- Electric motor or GPS anchorRecommended
- Rocky shores and slipwaysRecommended
The bow seat can also be used as a casting platform. Four rod holders and accessory tracks on the grab rails give you room for tackle and accessories, and two anglers can fish without getting in each other's way.
At 130 kg, the boat is transported on a trailer or kept at a mooring through the season.
The transom takes a petrol or electric outboard, and the bow has room for an electric motor with GPS anchor mode that holds the boat on the spot you choose.
High-density polyethylene takes knocks against stones, slipways and piers, and scratches on the hull only affect its looks.
HDPE, aluminum or fiberglass?
How the three hull materials of small rigid boats compare in everyday use. This is a comparison of materials, not of specific models.
HDPE
High-density polyethylene
Aluminum
Marine aluminum alloy
Fiberglass
Glass fibre, resin and gelcoat
Flexes on impact, scratches are cosmetic
Dents rather than cracks
Gelcoat chips, a hard impact can crack the hull
No rust or osmosis, rinse the metal fittings
A white oxide film forms in salt water, galvanic corrosion is possible where it touches other metals
No rust, but osmosis is possible in an old or damaged hull
Rinse after the trip
Rinse, check rivets, welds and coating
Plus repairing chips in the gelcoat
The colour goes all the way through the material
Painted hulls need touching up over time
Gelcoat fades without it
Quieter than aluminum
Waves and dropped gear ring through the hull
The laminate damps waves and knocks
Argo-Scout 310: 130 kg
Thin sheet keeps the weight down
Laminate and gelcoat add weight
Done by a specialist
Done by a specialist
Resin and gelcoat are easy to buy
The plastic is melted down and reused
The metal is melted down and reused
Glass fibre and resin are hard to separate
Choose your Argo-Scout 310
Choose the configuration that suits how you fish. Each one includes everything in the previous one and adds more equipment.
-
01
Standard
The boat with standard deck fittings. Outboard motor not included.
Included:
- Bow casting deck with storage hatch
- 2 stern seats with storage hatches
- 2 aluminum grab rails with accessory tracks
- 4 rod holders
- Bow accessory track
- Aluminum transom plate
- 2 stern steps
- Drain plug
2 189 €Notify me -
02
Standard+
For mooring and rowing.
Everything in Standard, plus:
- 4 mooring cleats
- 2 oars with oarlocks and oar holders
Price on request -
03
Console
Steering console, lights and power on board.
Everything in Standard+, plus:
- Steering console
- LED deck lighting, 6 lights
- 4 navigation lights
- Switch panel
- 12V socket and 2 USB-C sockets
Price on request -
04
Fisher Pro
Everything for a day on the water: motor, steering and GPS anchor.
Everything in Console, plus:
- Motor
- Hidea EFI 15 HP outboard with remote control
- 2 control cables
- Hydrofoil
- Steering
- Helm, steering wheel and cable
- Bow electric motor with GPS anchor
- Haibo iPenguin P70 with quick-release bracket
- Anderson 50A socket
- LiFePO4 battery 12V 100Ah
Price on request
See it on the water
Frequently asked questions
Which motor should I choose?
Choose a short-shaft (S) outboard of up to 20 HP and up to 60 kg, with 9.9-15 HP recommended. In our tests with a 9.9 HP motor, the boat got on plane with one person on board when the weight was moved forward or a hydrofoil was fitted. With two people it stayed in displacement mode. If you usually go out in pairs, choose a 15 HP motor.
Can I use an electric motor?
Yes. With an electric outboard the boat moves in displacement mode. The bow has room for an electric motor with GPS anchor mode.
Do I need a trailer?
Yes. The boat weighs 130 kg and is 3.05 m long, so it does not fit in a car or on a standard roof rack.
How many people can it carry?
The boat is rated for 3 persons and a maximum load of 300 kg, including the motor, fuel and gear. CE category C.
Can the boat stay outdoors?
Yes. The polyethylene is UV-resistant, and the hull needs no painting. Before winter, remove the drain plug, let the water out and store the boat upside down or under a cover so that snow and ice do not collect inside.
What about scratches?
Light scratches and scuffs are normal for HDPE and are usually cosmetic. Deep gouges should be inspected: contact us before attempting any heat repair or plastic welding.
Can I use it in salt water?
Yes. After use in salt water, rinse the boat, the transom plate and the fittings with fresh water.
How do I get the boat?
The Argo-Scout 310 can be picked up at our store in Vilnius (Talino g. 10A). Contact us to arrange a time.
Questions about this boat?
Write or call us. We will tell you more about this boat, help you choose the motor and accessories and answer your questions about delivery to your country.